NCC 2016 Volume Two
Classification
Building class 1a Building class 1b Building class 2 Building class 3 Building class 4 Building class 5 Building class 6 Building class 7a Building class 7b Building class 8 Building class 9a Building class 9b Building class 9c Building class 10a Building class 10b Building class 10c

Filter

Classification
Building class 1a Building class 1b Building class 2 Building class 3 Building class 4 Building class 5 Building class 6 Building class 7a Building class 7b Building class 8 Building class 9a Building class 9b Building class 9c Building class 10a Building class 10b Building class 10c
Part 1.0 Application

Part 1.0 Application

1.0.1 Compliance with the NCC

Compliance with the NCC is achieved by satisfying the Performance Requirements.

1.0.2 Meeting the Performance Requirements

The Performance Requirements can only be satisfied by a—

(c)

combination of (a) and (b).

Figure 1.0.2

NCC COMPLIANCE STRUCTURE

v2_Fig102_2016.svg

Notes:

  1. The term Performance Solution was formerly known as Alternative Solution.
  2. The terms Performance Solution and Deemed-to-Satisfy Solution were formerly used under the term Building Solution.

1.0.3 Performance Solutions

(a)

A Performance Solution must—

(i)

comply with the Performance Requirements; or

(ii)

and be assessed according to one or more of the Assessment Methods.

(b)

A Performance Solution will only comply with the NCC when the Assessment Methods used satisfactorily demonstrate compliance with the Performance Requirements.

1.0.4 Deemed-to-Satisfy Solutions

(a)

A Deemed-to-Satisfy Solution which complies with the Deemed-to-Satisfy Provisions is deemed to comply with the Performance Requirements.

(b)

A Deemed-to-Satisfy Solution may be assessed according to one or more of the Assessment Methods, as appropriate.

(c)

Where an acceptable construction manual and an acceptable construction practice contained in the same Part of Section 3 are deemed to satisfy the same component of a Performance Requirement, in order to comply with the Deemed-to-Satisfy Provisions it is only necessary to satisfy—

(i)

the appropriate acceptable construction manual; or

(ii)

the appropriate acceptable construction practice.

(d)

Where an acceptable construction manual and an acceptable construction practice contained in the same Part of Section 3 are deemed to satisfy the different components of a Performance Requirement, compliance with the Deemed-to-Satisfy Provisions may require satisfying both the listed acceptable construction manual and the acceptable construction practice for their specific components.

Explanatory information

Explanatory Information:

In Section 3 of Volume Two the Deemed-to-Satisfy Provisions are divided into two compliance pathways; "acceptable construction practices" and "acceptable construction manuals".

  • "Acceptable construction practices" are some of the most common forms of national construction practice and are written into Section 3.
  • "Acceptable construction manuals" are the deemed-to-satisfy referenced documents.

In general, either an "acceptable construction practice" or an "acceptable construction manual" may be used as options when proposing a Deemed-to-Satisfy Solution.

1.0.5 Assessment Methods

The following Assessment Methods, or any combination of them, can be used to determine that a Performance Solution or a Deemed-to-Satisfy Solution complies with the Performance Requirements, as appropriate:

(a)

Evidence to support that the use of a material or product, form of construction or design meets a Performance Requirement or a Deemed-to-Satisfy Provision as described in 1.2.2.

(b)

Verification Methods such as—

(i)

the Verification Methods in the NCC; or

(ii)

such other Verification Methods as the appropriate authority accepts for determining compliance with the Performance Requirements.

(d)

Comparison with the Deemed-to-Satisfy Provisions.

Explanatory information

Explanatory Information:

The Assessment Methods described above are applicable to the assessment of Performance Solutions or Deemed-to-Satisfy Solutions to determine that they comply with the relevant Performance Requirements, as appropriate.

1.0.6 Defined terms

Words with specific meanings are printed in italics and are defined in 1.1.1.

1.0.7 Relevant Performance Requirements

In order to comply with the provisions of 1.1.5 (to comply with Section 1 and 2) the following method must be used to determine the Performance Requirement or Performance Requirements relevant to the Performance Solution:

(a)

Where a Performance Requirement is satisfied entirely by a Performance Solution:

(i)

Identify the relevant Performance Requirement from the Section or Part to which the Performance Solution applies.

(ii)

Identify Performance Requirements from other Sections or Parts that are relevant to any aspects of the Performance Solution proposed or that are affected by the application of the Performance Solution.

(b)

Where a Performance Requirement is satisfied by a Performance Solution in combination with a Deemed-to-Satisfy Solution:

(i)

Identify the relevant Deemed-to-Satisfy Provisions of each Section or Part that is be the subject of the Performance Solution.

(ii)

Identify the Performance Requirements from the same Sections or Parts that are relevant to the identified Deemed-to-Satisfy Provisions.

(iii)

Identify Performance Requirements from other Sections or Parts that are relevant to any aspects of the Performance Solution proposed or that are affected by the application of the Deemed-to-Satisfy Provisions that are the subject of the Performance Solution.