The National Construction Code is Australia’s primary set of technical design and construction provisions for buildings.

As a performance-based code, it sets the minimum required level for the safety, health, amenity, accessibility and sustainability of certain buildings. The Australian Building Codes Board, on behalf of the Australian Government and each State and Territory government, produces and maintains the National Construction Code.

This Glazing Calculator has been developed to assist users with calculations required by the energy efficiency Deemed-to-Satisfy Provisions for BCA 2009, Volume Two.

Calculator

This Glazing Calculator has been developed to assist users with calculations required by the energy efficiency Deemed-to-Satisfy Provisions for NCC 2013, Volume One.

Calculator

This Glazing Calculator has been developed to assist users with calculations required by the energy efficiency Deemed-to-Satisfy Provisions for BCA 2010 and NCC 2011, Volume One.

Calculator

This Glazing Calculator has been developed to assist users with calculations required by the energy efficiency Deemed-to-Satisfy Provisions for BCA 2010, NCC 2011 and NCC 2012, Volume Two.

Calculator

The NCC 2019 Pump System Calculator assists in understanding and applying NCC Volume One Part J5.7 Pump System DTS Provisions for energy efficiency.

Calculator

This Glazing Calculator has been developed to assist users with calculations required by the energy efficiency Deemed-to-Satisfy Provisions for BCA 2009, Volume One.

Calculator

This Glazing Calculator has been developed to assist users with calculations required by the energy efficiency Deemed-to-Satisfy Provisions for NCC 2012, Volume One.

Calculator

This non-mandatory Handbook provides details of the structural robustness Verification Methods for buildings in NCC Volumes One and Two.

Handbook

NCC: A Performance-based Code provides the following content:an overview of NCC as a performance-based code;language used in the Performance Requirements of the NCC; andinformation about Performanc

This non-mandatory handbook provides details of the structural reliability verification methods for buildings in NCC Volumes One and Two.

Handbook

This non-mandatory Handbook provides guidance on cross-connection control requirements in NCC Volume Three.

Handbook

This non-mandatory Handbook has been prepared to provide guidance on the risks, equipment limitations and other matters a designer should address when considering a Performance Solution (Alternativ

Handbook

This non-mandatory Handbook provides guidance on warm water system requirements in NCC Volume Three.

Handbook

The Sanitary Facilities Calculator assists to better understand and apply the sanitary and other facilities DTS Provisions in NCC Volume One Part F2.

Calculator

This report estimates the potential construction costs for an accessible adult change facility in an existing modified BCA facility or a separated facility as specified below:

Report

This case study shows how to calculate the Total R-Value, including thermal bridging, for roof system in a Class 7 storage facility located in climate zone 6.

Case study

This case study shows how to calculate the Total R-Value, including thermal bridging, for a wall system in a Class 6 shop located in climate zone 3.

Case study

This case study shows how to calculate the Total R-Value, including thermal bridging, for a wall system in a Class 3 residential building located in climate zone 5.

Case study