NCC 2016 Volume Two
Classification
Building class 1a Building class 1b Building class 2 Building class 3 Building class 4 Building class 5 Building class 6 Building class 7a Building class 7b Building class 8 Building class 9a Building class 9b Building class 9c Building class 10a Building class 10b Building class 10c

Filter

Classification
Building class 1a Building class 1b Building class 2 Building class 3 Building class 4 Building class 5 Building class 6 Building class 7a Building class 7b Building class 8 Building class 9a Building class 9b Building class 9c Building class 10a Building class 10b Building class 10c
NSW Part 3.12.1 Building Fabric Thermal Insulation

NSW Part 3.12.1 Building Fabric Thermal Insulation

Appropriate Performance Requirements

Appropriate

Where a Performance Solution to NSW 3.12.1 is proposed, that proposal must comply with—

  1. ; and
  2. relevant Performance Requirements determined in accordance with 1.0.7.

NSW 3.12.1 Application of NSW Part 3.12.1

(a)

Compliance with NSW 3.12.1.1 satisfies NSW P2.6.1(a) for thermal insulation and thermal breaks.

(b)

only applies to thermal insulation in a Class 1 or 10 building where a development consent specifies that the insulation is to be provided as part of the development.

(c)

In (b), the term development consent has the meaning given by the Environmental Planning and Assessment Act 1979.

(d)

The Deemed-to-Satisfy Provisions of this Part for thermal breaks apply to all Class 1 buildings and Class 10a buildings with a conditioned space.

NSW 3.12.1.1 Compliance with BCA provisions

(a)

Thermal insulation in a building must comply with the national BCA provisions of .

(b)

A thermal break must be provided between the external cladding and framing in accordance with national BCA provisions of—

(i)

for a metal framed roof; and

(ii)

for a metal framed wall.

(c)

Compensation for reduction in ceiling insulation must comply with the national BCA provisions of 3.12.1.2(e).

(d)

A floor with an in-slab or in-screed heating or cooling system must comply with the national BCA provisions of—

(i)

, and (e) for a suspended floor; or

(ii)

, (d) and (e) for a concrete slab-on-ground.