NCC 2019 Volume Two
Search the National Construction Code editions
Schedule 4 Referenced documents
The Standards and other documents listed in Schedule 4 are referred to in the NCC.
No. |
Date |
Title |
Volume One |
Volume Two |
Volume Three |
AS/NZS ISO 717 Part 1 |
2004 |
Acoustics — Rating of sound insulation in buildings and of building elements — Airborne sound insulation See Note 1 |
N/A |
||
AS ISO 717 Part 2 |
2004 |
Acoustics — Rating of sound insulation in buildings and of building elements — Impact sound insulation |
N/A |
N/A |
|
AS 1056 Part 1 |
1991 |
Storage water heaters — General requirements (incorporating amendments 1, 2, 3, 4 and 5) |
N/A |
N/A |
|
AS/NZS 1170 Part 0 |
2002 |
Structural design actions — General principles (incorporating amendments 1, 3 and 4) |
N/A |
||
AS/NZS 1170 Part 1 |
2002 |
Structural design actions — Permanent, imposed and other actions (incorporating amendments 1 and 2) |
N/A |
||
AS/NZS 1170 Part 2 |
2011 |
Structural design actions — Wind actions (incorporating amendments 1, 2, 3, 4 and 5) |
B1.2, B1.4, Spec B1.2, FV1.1, Schedule 3 |
||
AS/NZS 1170 Part 3 |
2003 |
Structural design actions — Snow and ice actions (incorporating amendments 1 and 2) |
|||
AS 1170 Part 4 |
2007 |
Structural design actions — Earthquake actions in Australia (incorporating amendments 1 and 2) |
N/A |
||
AS 1191 |
2002 |
Acoustics — Method for laboratory measurement of airborne sound transmission insulation of building elements |
N/A |
N/A |
|
AS 1273 |
1991 |
Unplasticized PVC (UPVC) downpipe and fittings for rainwater |
N/A |
N/A |
|
AS 1288 |
2006 |
Glass in buildings — Selection and installation (incorporating amendments 1, 2 and 3) |
N/A |
||
AS 1289.6.3.3 |
1997 |
Methods of testing soils for engineering purposes — Method 6.3.3: Soil strength and consolidation tests — Determination of the penetration resistance of a soil — Perth sand penetrometer test (incorporating amendment 1) |
N/A |
N/A |
|
AS 1397 |
2011 |
Continuous hot-dip metallic coated steel sheet and strip — Coatings of zinc and zinc alloyed with aluminium and magnesium (incorporating amendment 1) |
N/A |
N/A |
|
AS 1428 Part 1 |
2009 |
Design for access and mobility — General requirements for access — New building work (incorporating amendments 1 and 2) |
D2.10, D2.15, D2.17, D3.1, D3.2, D3.3, D3.6, D3.9, D3.10, D3.12, Spec D3.10, E3.8, F2.4, G4.5, Schedule 3 |
||
AS 1428 Part 1 |
2001 |
Design for access and mobility — General requirements for access — New building work |
N/A |
||
AS 1428 Part 1 (Supplement 1) |
1993 |
Design for access and mobility — General requirements for access — Buildings — Commentary |
N/A |
N/A |
|
AS 1428 Part 2 |
1992 |
Design for access and mobility — Enhanced and additional requirements — Buildings and facilities |
H2.2, H2.3, H2.4, H2.5, H2.7, H2.10, H2.11, H2.12, H2.13, H2.14 |
N/A |
|
AS 1428 Part 4 |
1992 |
Design for access and mobility — Tactile ground surface indicators for the orientation of people with vision impairment |
N/A |
N/A |
|
AS/NZS 1428 Part 4.1 |
2009 |
Design for access and mobility — Means to assist the orientation of people with vision impairment — Tactile ground surface indicators (incorporating amendments 1 and 2) |
N/A |
N/A |
|
AS 1530 Part 1 |
1994 |
Methods for fire tests on building materials, components and structures — Combustibility test for materials See Note 2 |
|||
AS 1530 Part 2 |
1993 |
Methods for fire tests on building materials, components and structures — Test for flammability of materials (incorporating amendment 1) See Note 2 |
|||
AS/NZS 1530 Part 3 |
1999 |
Methods for fire tests on building materials, components and structures — Simultaneous determination of ignitability, flame propagation, heat release and smoke release |
|||
AS 1530 Part 4 |
2014 |
Methods for fire tests on building materials, components and structures — Fire-resistance tests for elements of construction See Note 2 |
A5.6, C3.15, C3.16, Spec C1.13, Spec C1.13a, Spec C3.15, Spec D1.12, Schedule 3, Schedule 6 |
||
AS 1562 Part 1 |
2018 |
Design and installation of sheet roof and wall cladding — Metal See Note 3 |
N/A |
||
AS/NZS 1562 Part 2 |
1999 |
Design and installation of sheet roof and wall cladding — Corrugated fibre-reinforced cement |
N/A |
N/A |
|
AS/NZS 1562 Part 3 |
1996 |
Design and installation of sheet roof and wall cladding — Plastic |
N/A |
||
AS 1657 |
2018 |
Fixed platforms, walkways, stairways and ladders — Design, construction and installation |
N/A |
N/A |
|
AS/NZS 1664 Part 1 |
1997 |
Aluminium structures — Limit state design (incorporating amendment 1) |
N/A |
||
AS/NZS 1664 Part 2 |
1997 |
Aluminium structures — Allowable stress design (incorporating amendment 1) |
N/A |
||
AS 1668 Part 1 |
2015 |
The use of ventilation and air conditioning in buildings — Fire and smoke control in buildings (incorporating amendment 1) |
C2.12, C3.15, Spec C2.5, D1.7,Spec E1.8, E2.2, E2.3, F4.12, Spec E2.2b, Spec G3.8 |
N/A |
N/A |
AS 1668 Part 2 |
2012 |
The use of ventilation and airconditioning in buildings — Mechanical ventilation in buildings (incorporating amendments 1 and 2) |
N/A |
||
AS 1668 Part 4 |
2012 |
The use of ventilation and airconditioning in buildings — Natural ventilation of buildings |
N/A |
N/A |
|
AS 1670 Part 1 |
2018 |
Fire detection, warning, control and intercom systems — System design, installation and commissioning — Fire See Note 4 |
C3.5, C3.6, C3.7, C3.8, C3.11, D2.21, E2.3, G4.8, Spec C3.4, E2.2, Spec E2.2a, Spec E2.2d, Spec G3.8 |
N/A |
|
AS 1670 Part 3 |
2018 |
Fire detection, warning, control and intercom systems — System design, installation and commissioning — Fire alarm monitoring See Note 4 |
N/A |
N/A |
|
AS 1670 Part 4 |
2018 |
Fire detection, warning, control and intercom systems — System design, installation and commissioning — Emergency warning and intercom systems See Note 4 |
N/A |
N/A |
|
AS/NZS 1680 Part 0 |
2009 |
Interior lighting — Safe movement |
N/A |
||
AS 1684 Part 2 |
2010 |
Residential timber-framed construction — Non-cyclonic areas (incorporating amendments 1 and 2) |
3.0.5, 3.2.5.6, 3.4.0.2, 3.4.1.2, 3.4.3.0, 3.5.4.2, 3.5.4.3, 3.5.4.4 |
N/A |
|
AS 1684 Part 3 |
2010 |
Residential timber-framed construction — Cyclonic areas (incorporating amendment 1) |
3.0.5, 3.2.5.6, 3.4.0.2, 3.4.1.2, 3.4.3.0, 3.5.4.2, 3.5.4.3, 3.5.4.4 |
N/A |
|
AS 1684 Part 4 |
2010 |
Residential timber-framed construction — Simplified — Non-cyclonic areas (incorporating amendment 1) |
3.0.5, 3.2.5.6, 3.4.0.2, 3.4.1.2, 3.4.3.0, 3.5.4.2, 3.5.4.3, 3.5.4.4 |
N/A |
|
AS 1720 Part 1 |
2010 |
Timber structures — Design methods (incorporating amendments 1, 2 and 3) |
N/A |
||
AS 1720 Part 4 |
2006 |
Timber structures — Fire resistance for structural adequacy of timber members |
|||
AS 1720 Part 5 |
2015 |
Timber structures — Nailplated timber roof trusses |
N/A |
||
AS 1735 Part 11 |
1986 |
Lifts, escalators and moving walks — Fire-rated landing doors |
N/A |
N/A |
|
AS 1735 Part 12 |
1999 |
Lifts, escalators and moving walks — Facilities for persons with disabilities (incorporating amendment 1) |
N/A |
N/A |
|
AS/NZS 1859 Part 4 |
2018 |
Reconstituted wood-based panels — Specifications — Wet process fibreboard See Note 5 |
N/A |
N/A |
|
AS 1860 Part 2 |
2006 |
Particleboard flooring — Installation (incorporating amendment 1) |
N/A |
||
AS 1905 Part 1 |
2015 |
Components for the protection of openings in fire-resistant walls — Fire-resistant doorsets (incorporating amendment 1) |
N/A |
N/A |
|
AS 1905 Part 2 |
2005 |
Components for the protection of openings in fire-resistant walls — Fire-resistant roller shutters |
N/A |
N/A |
|
AS 1926 Part 1 |
2012 |
Swimming pool safety — Safety barriers for swimming pools |
N/A |
||
AS 1926 Part 2 |
2007 |
Swimming pool safety — Location of safety barriers for swimming pools (incorporating amendments 1 and 2) |
N/A |
||
AS 1926 Part 3 |
2010 |
Swimming pool safety — Water recirculation systems (incorporating amendment 1) |
N/A |
||
AS 2047 |
2014 |
Windows and external glazed doors in buildings (incorporating amendments 1 and 2) See Note 6 |
N/A |
||
AS 2049 |
2002 |
Roof tiles (incorporating amendment 1) |
N/A |
||
AS 2050 |
2018 |
Installation of roof tiles |
N/A |
||
AS 2118 Part 1 |
2017 |
Automatic fire sprinkler systems — General systems (incorporating amendment 1) |
N/A |
N/A |
|
AS 2118 Part 4 |
2012 |
Automatic fire sprinkler systems — Sprinkler protection for accommodation buildings not exceeding four storeys in height |
N/A |
N/A |
|
AS 2118 Part 6 |
2012 |
Automatic fire sprinkler systems — Combined sprinkler and hydrant systems in multistorey buildings |
N/A |
N/A |
|
AS 2159 |
2009 |
Piling — Design and installation (incorporating amendment 1) |
N/A |
||
AS/NZS 2179 Part 1 |
2014 |
Specifications for rainwater goods, accessories and fasteners — Metal shape or sheet rainwater goods, and metal accessories and fasteners |
N/A |
N/A |
|
AS/NZS 2269 Part 0 |
2012 |
Plywood — Structural — Specifications (incorporating amendment 1) |
N/A |
N/A |
|
AS/NZS 2293 Part 1 |
2018 |
Emergency lighting and exit signs for buildings — System design, installation and operation |
N/A |
N/A |
|
AS/NZS 2327 |
2017 |
Composite structures — Composite steel-concrete construction in buildings |
|||
AS 2419 Part 1 |
2005 |
Fire hydrant installations — System design, installation and commissioning (incorporating amendment 1) |
C2.12, E1.3, Spec E1.5a, H3.9 |
N/A |
|
AS 2441 |
2005 |
Installation of fire hose reels (incorporating amendment 1) |
N/A |
||
AS 2444 |
2001 |
Portable fire extinguishers and fire blankets — Selection and location |
N/A |
N/A |
|
AS 2665 |
2001 |
Smoke/heat venting systems — Design, installation and commissioning |
N/A |
N/A |
|
AS/NZS 2699 Part 1 |
2000 |
Built-in components for masonry construction — Wall ties |
N/A |
N/A |
|
AS/NZS 2699 Part 3 |
2002 |
Built-in components for masonry construction — Lintels and shelf angles (durability requirements) |
N/A |
N/A |
|
AS 2870 |
2011 |
Residential slabs and footings |
3.1.1.0, 3.1.3.4, 3.1.4.4, 3.2.0, 3.2.1, 3.2.2.4, 3.2.2.6, 3.2.3.2, 3.2.4.1, 3.2.5, 3.2.5.2, 3.2.5.6 |
N/A |
|
AS/NZS 2890 Part 6 |
2009 |
Parking facilities — Off-street parking for people with disabilities |
N/A |
N/A |
|
AS/NZS 2904 |
1995 |
Damp-proof courses and flashings (incorporating amendments 1 and 2) |
N/A |
||
AS/NZS 2908 Part 1 |
2000 |
Cellulose-cement products — Corrugated sheets |
N/A |
N/A |
|
AS/NZS 2908 Part 2 |
2000 |
Cellulose-cement products — Flat sheets |
|||
AS/NZS 2918 |
2018 |
Domestic solid fuel burning appliances — Installation See Note 11 |
N/A |
||
AS/NZS 3013 |
2005 |
Electrical installations — Classification of the fire and mechanical performance of wiring system elements |
N/A |
N/A |
|
AS/NZS 3500 Part 0 |
2003 |
Plumbing and drainage — Glossary of terms |
|||
AS/NZS 3500 Part 1 |
2018 |
Plumbing and drainage — Water services |
N/A |
N/A |
|
AS/NZS 3500 Part 2 |
2018 |
Plumbing and drainage — Sanitary plumbing and drainage |
N/A |
N/A |
|
AS/NZS 3500 Part 3 |
2018 |
Plumbing and drainage — Stormwater drainage |
N/A |
||
AS/NZS 3500 Part 4 |
2018 |
Plumbing and drainage — Heated water services (incorporating amendment 1) |
N/A |
N/A |
|
AS 3600 |
2018 |
Concrete structures (incorporating amendment 1) |
V2.1.1, 3.0.4, 3.1.4.4, 3.2.2.4, 3.2.3.1, 3.2.5.6, Schedule 5 |
||
AS 3660 Part 1 |
2014 |
Termite management — New building work (incorporating amendment 1) |
N/A |
||
AS 3660 Part 3 |
2014 |
Termite management — Assessment criteria for termite management systems |
N/A |
N/A |
|
AS/NZS 3666 Part 1 |
2011 |
Air-handling and water systems of buildings — Microbial control — Design, installation and commissioning |
N/A |
N/A |
|
AS 3700 |
2018 |
Masonry structures |
3.3.1.0, 3.3.2.0, 3.3.3.0, 3.3.4.0, 3.3.5.0, 3.3.5.4, 3.3.6.0, 3.3.6.1, Schedule 5 |
||
AS 3740 |
2010 |
Waterproofing of domestic wet areas (incorporating amendment 1) |
N/A |
||
AS 3786 |
2014 |
Smoke alarms using scattered light, transmitted light or ionization (incorporating amendment 1 and 2) See Note 7 |
N/A |
||
AS/NZS 3823 Part 1.2 |
2012 |
Performance of electrical appliances — Airconditioners and heat pumps — Ducted airconditioners and air-to-air heat pumps — Testing and rating for performance |
N/A |
N/A |
|
AS 3959 |
2018 |
Construction of buildings in bushfire-prone areas |
N/A |
||
AS/NZS 4020 |
2018 |
Testing of products for use in contact with drinking water See Note 8 |
|||
AS 4055 |
2012 |
Wind loads for housing (incorporating amendment 1) |
|||
AS 4072 Part 1 |
2005 |
Components for the protection of openings in fire-resistant separating elements — Service penetrations and control joints (incorporating amendment 1) See Note 9 |
N/A |
||
AS 4100 |
1998 |
Steel structures (incorporating amendment 1) |
|||
AS/NZS 4200 Part 1 |
2017 |
Pliable building membranes and underlays — Materials |
|||
AS 4200 Part 2 |
2017 |
Pliable building membranes and underlays — Installation requirements (incorporating amendment 1) |
N/A |
||
AS/NZS 4234 |
2008 |
Heated water systems — Calculation of energy consumption (incorporating amendments 1, 2 and 3) |
N/A |
N/A |
|
AS 4254 Part 1 |
2012 |
Ductwork for air-handling systems in buildings — Flexible duct |
N/A |
||
AS 4254 Part 2 |
2012 |
Ductwork for air-handling systems in buildings — Rigid duct |
N/A |
||
AS/NZS 4256 Part 1 |
1994 |
Plastic roof and wall cladding materials — General requirements |
N/A |
N/A |
|
AS/NZS 4256 Part 2 |
1994 |
Plastic roof and wall cladding materials — Unplasticized polyvinyl chloride (uPVC) building sheets |
N/A |
N/A |
|
AS/NZS 4256 Part 3 |
1994 |
Plastic roof and wall cladding materials — Glass fibre reinforced polyester (GRP) |
N/A |
N/A |
|
AS/NZS 4256 Part 5 |
1996 |
Plastic roof and wall cladding materials — Polycarbonate |
N/A |
N/A |
|
AS/NZS 4284 |
2008 |
Testing of building facades |
N/A |
||
AS/NZS 4505 |
2012 |
Garage doors and other large access doors (incorporating amendment 1) |
N/A |
||
AS 4552 |
2005 |
Gas fired water heaters for hot water supply and/or central heating |
N/A |
N/A |
|
AS 4586 |
2013 |
Slip resistance classification of new pedestrian surface materials (incorporating amendment 1) See Note 10 |
N/A |
||
AS 4597 |
1999 |
Installation of roof slates and shingles (Non-interlocking type) |
N/A |
||
AS/NZS 4600 |
2018 |
Cold-formed steel structures |
|||
AS 4654 Part 1 |
2012 |
Waterproofing membranes for external above-ground use — Materials |
N/A |
||
AS 4654 Part 2 |
2012 |
Waterproofing membranes for external above-ground use — Design and installation |
N/A |
||
AS 4678 |
2002 |
Earth-retaining structures |
N/A |
N/A |
|
AS 4773 Part 1 |
2015 |
Masonry in small buildings — Design (incorporating amendment 1) |
N/A |
3.3.1.0, 3.3.2.0, 3.3.3.0, 3.3.4.0, 3.3.5.0, 3.3.5.4, 3.3.6.0 |
N/A |
AS 4773 Part 2 |
2015 |
Masonry in small buildings — Construction |
N/A |
3.3.1.0, 3.3.2.0, 3.3.3.0, 3.3.4.0, 3.3.5.0, 3.3.5.4, 3.3.6.0 |
N/A |
AS/NZS 4859 Part 1 |
2018 |
Thermal insulation materials for buildings — General criteria and technical provisions |
N/A |
||
AS/NZS 4859 Part 2 |
2018 |
Thermal insulation materials for buildings — Design |
N/A |
N/A |
|
AS 5113 |
2016 |
Classification of external walls of buildings based on reaction-to-fire performance (incorporating amendment 1) |
N/A |
N/A |
|
AS 5146 Part 1 |
2015 |
Reinforced autoclaved aerated concrete — Structures (incorporating amendment 1) |
N/A |
||
AS 5216 |
2018 |
Design of post-installed and cast-in fastenings in concrete |
N/A |
||
AS 5637 Part 1 |
2015 |
Determination of fire hazard properties — Wall and ceiling linings |
|||
AS ISO 9239 Part 1 |
2003 |
Reaction to fire tests for floorings — Determination of the burning behaviour using a radiant heat source |
|||
AS/NZS ISO 9972 |
2015 |
Thermal performance of buildings — Determination of air permeability of buildings — Fan pressurization method |
N/A |
||
AIRAH-DA09 |
1998 |
Air conditioning load estimation |
N/A |
N/A |
|
AIRAH-DA28 |
2011 |
Building management and control systems |
N/A |
N/A |
|
ANSI/ASHRAE Standard 55 |
2013 |
Thermal environmental conditions for human occupancy |
|||
ANSI/ASHRAE Standard 140 |
2007 |
Standard method of test for the evaluation of building energy analysis computer programs |
N/A |
||
ASTM E2073-10 |
2010 |
Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings |
N/A |
N/A |
|
ASTM E72-15 |
2015 |
Standard Test Methods of Conducting Strength Tests of Panels for Building Construction |
N/A |
N/A |
|
ASTM E695-03 |
2003 |
Standard Test Method of Measuring Relative Resistance of Wall, Floor and Roof Construction to Impact Loading |
N/A |
N/A |
|
ASTM E903 |
2012 |
Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres |
N/A |
N/A |
|
AHRI 460 |
2005 |
Performance rating of remote mechanical-draft air-cooled refrigerant condensers |
N/A |
N/A |
|
AHRI 551/591 |
2015 |
Performance rating of water-chilling and heat pump water-heating packages using the vapor compression cycle. |
N/A |
N/A |
|
ABCB |
2011 |
Protocol for Structural Software, Version 2011.2 |
N/A |
||
ABCB |
2012 |
Standard for Construction of Buildings in Flood Hazard Areas, Version 2012.3 |
N/A |
||
ABCB |
2019 |
Standard for NatHERS Heating and Cooling Load Limits, Version 2019.1 |
N/A |
||
CIBSE Guide A |
2015 |
Environmental design |
N/A |
N/A |
|
Disability Standards for Accessible Public Transport |
2002 |
N/A |
N/A |
||
Education and Care Services National Law Act (Vic) |
2010 |
||||
European Union Commission Regulation 547/2012 |
2012 |
Ecodesign requirements for water pumps |
N/A |
N/A |
|
European Union Commission Regulation 622/Annexx II, point 2 |
2012 |
Eco-design requirements for glandless standalone circulators and glandless circulators integrated in products |
N/A |
N/A |
|
FPAA101D |
2018 |
Automatic Fire Sprinkler System Design and Installation — Domestic Water Supply |
CV3, C1.5,C1.13, C2.1, C2.6, C2.7, C3.5, C3.6, C3.7, C3.8, C3.11, Spec C1.1, Spec C1.10, D1.3, D1.12, D2.21, D2.25, E1.3, Spec E1.5, Spec E1.5a, E2.2, Spec E2.2a, G3.1, G3.6, Spec G3.8, H1.2 |
N/A |
|
FPAA101H |
2018 |
Automatic Fire Sprinkler System Design and Installation — Hydrant Water Supply |
CV3, C1.5,C1.13, C2.1, C2.6, C2.7, Spec C1.1, Spec C1.10, E1.3, Spec E1.5, Spec E1.5a, E2.2, Spec E2.2a, G3.1, G3.6, Spec G3.8, H1.2 |
N/A |
|
ISO 140 Part 6 |
1998E |
Acoustics — Measurement of sound insulation in buildings and of building elements — Laboratory measurements of impact sound insulation of floors |
N/A |
N/A |
|
ISO 540 |
2008 |
Hard coal and coke — Determination of ash fusibility |
N/A |
N/A |
|
ISO 8336 |
1993E |
Fibre-cement flat sheets |
|||
ISO 25745 Part 2 |
2015 |
Energy performance of lifts, escalators and moving walks: Energy calculation and classification for lifts (elevators) |
N/A |
N/A |
|
NASH Standard |
2014 |
Steel Framed Construction in Bushfire Areas (incorporating amendment A) |
N/A |
N/A |
|
NASH Standard Part 1 |
2005 |
Residential and Low-Rise Steel Framing — Design Criteria (incorporating amendments A, B and C) |
N/A |
||
NASH Standard Part 2 |
2014 |
Residential and Low-Rise Steel Framing — Design Solutions (incorporating amendment A) |
N/A |
||
N/A |
N/A |
Northern Territory Deemed to Comply Standards Manual |
N/A |
N/A |
|
TN 61 |
Cement Concrete and Aggregates Australia — Technical note — Articulated walling |
N/A |
N/A |
Notes associated with Table 1:
For AS/NZS ISO 717.1:
Test reports based on AS 1276—1979 and issued prior to AS/NZS 1276.1—1999 being referenced in the NCC remain valid.
The STC values in reports based on AS 1276—1979 shall be considered to be equivalent to Rw values.
Test reports based on AS/NZS 1276.1 prepared after the NCC reference date for AS/NZS 1276.1—1999 must be based on that version.
Test reports based on ISO 717-1—1996 and issued prior to AS/NZS ISO 717.1—2004 being referenced in the NCC remain valid.
Reports based on AS/NZS ISO 717.1 relating to tests carried out after the NCC reference date for AS/NZS ISO 717.1—2004 must relate to the amended Standard.
For AS 1530 Parts 1 to 4:
Until 1 May 2022, subject to the note to AS 4072.1, reports relating to tests carried out under earlier editions of AS 1530 Parts 1 to 4 remain valid.
Reports relating to tests carried out after the date of an amendment to a Standard must relate to the amended Standard.
For AS 1562.1, tests carried out based on AS 1562.1—1992 and issued prior to AS 1562.1—2018 being referenced in the NCC remain valid. Reports relating to tests carried out after the NCC reference date for AS 1562.1 must relate to the revised Standard.
For AS 1670.1, AS 1670.3 and AS 1670.4:
Notwithstanding A4.0(5), until 1 May 2022 either the current edition or the previous editions of the documents listed in Table 1.8 of AS 1670.1, AS 1670.3 and AS 1670.4 may be used to meet the requirements of AS 1670.1, AS 1670.3 and AS 1670.4 as applicable.
From 1 May 2022 A4.0(5) applies and only the edition of the documents listed in Table 1.8 of AS 1670.1, AS 1670.3 and AS 1670.4 that existed at the time of publication of the primary document may be used.
For AS/NZS 1859.4, the 2004 edition has been retained for a transitional period ending on 30 April 2020.
For AS 2047:
Tests carried out under earlier editions of AS 2047 remain valid.
Reports based on AS 2047 relating to tests carried out after the NCC reference date for AS 2047—2014 Amendment 2 must relate to the amended Standard.
For AS 3786:
Tests carried out under AS 3786—2014 Amendment 1 remain valid.
Reports based on AS 3786 relating to tests carried out after the NCC reference date for AS 3786—2014 Amendment 2 must relate to the amended Standard.
Test reports based on the 2005 edition of AS/NZS 4020 will continue to be accepted until 1 May 2024. Test reports prepared after the NCC reference date for the 2018 edition of AS/NZS 4020 must be based on the 2018 edition.
For AS 4072.1, until 1 May 2022, systems tested to AS 1530.4 prior to 1 January 1995 need not be retested to comply with the provisions in AS 4072.1.
For AS 4586:
Test reports based on the 2004 edition of AS/NZS 4586 and issued prior to the 2013 edition of AS 4586 being referenced in the NCC remain valid.
Test reports prepared after the NCC reference date of the 2013 edition of AS 4586 must be based on that version.
For the purposes of assessing compliance, the slip-resistance classifications of V, W and X in reports based on the 2004 edition of AS/NZS 4586 may be considered to be equivalent to slip-resistance classifications of P5, P4 and P3 respectively in the 2013 edition of AS 4586.
Test reports based on Appendix D of AS 4586—2013 and issued prior to the NCC reference date for AS 4586—2013 (incorporating Amendment 1) remain valid.
Test reports based on Appendix D of AS 4586—2013 and prepared after the NCC reference date for AS 4586—2013 (incorporating Amendment 1) must be based on that version.
Tests carried out based on AS/NZS 2918—2001 and issued prior to AS/NZS 2918—2018 being referenced in the BCA remain valid. Reports relating to tests carried out after the NCC reference date for AS/NZS 2918 must relate to the revised Standard.