NCC 2016 Volume One
Search the National Construction Code editions
Classification
Building class 1a Building class 1b Building class 2 Building class 3 Building class 4 Building class 5 Building class 6 Building class 7a Building class 7b Building class 8 Building class 9a Building class 9b Building class 9c Building class 10a Building class 10b Building class 10c

Filter

Classification
Building class 1a Building class 1b Building class 2 Building class 3 Building class 4 Building class 5 Building class 6 Building class 7a Building class 7b Building class 8 Building class 9a Building class 9b Building class 9c Building class 10a Building class 10b Building class 10c
Section D Access and Egress

Section D Access and Egress

After DP9 add Tas DP10

Tas DP10

A building or part of a building must be accessible in accordance with the requirements of a Standard made under the Disability Discrimination Act 1992.

Part D3 Access for People with a Disability

Delete D3.0 Deemed-to-Satisfy Provisions and substitute:

Tas D3.0 Deemed-to-Satisfy Provisions

(a)

Where a Deemed-to-Satisfy Solution is proposed, Performance RequirementsDP1 to DP6, DP8, DP9 and Tas DP10 are satisfied by complying with—

(i)

D1.1 to D1.16, D2.1 to D2.25, D3.1 to D3.12, and Tas D3.13; and

(ii)

in a building containing an atrium, Part G3; and

(iii)

additional requirements for Class 9b buildings, Part H1; and

(iv)

for public transport buildings, Part H2.

(b)

Where a Performance Solution is proposed, the relevant Performance Requirements must be determined in accordance with A0.7.

After D3.12 add Tas D3.13

Tas D3.13 Compliance with Premises Standards

(a)

A Building Solution must comply with the Disability (Access to Premises – Buildings) Standards 2010.

(b)

A Building Solution complies with Tas D3.0(a) if it complies with the applications, exceptions and concessions in the Disability (Access to Premises – Buildings) Standards 2010.