/news/2021/inspection-and-certification-fire-safety-systems
The final consultation in response to the Building Confidence Report (BCR) is now open.
/news/2018/energy-efficiency-and-ncc
It’s valuable for designers to understand and investigate the alternative pathways available to meet and/or exceed the Performance Requirements of the NCC energy efficiency provisions.
/editions/2019-a1/ncc-2019-volume-three-amendment-1/south-australia/sa-section-f-site-waste-water
SA Part F1 On-site waste water management systems
Introduction to this Part
This Part sets out the requirements for the design, construction, installation, replacement repair, alteration and maintenance of any part of an on-site wastewater…
/editions/2019-a1/ncc-2019-volume-one-amendment-1/section-j-energy-efficiency/part-j0-energy
Deemed-to-Satisfy Provisions
J0.0 Deemed-to-Satisfy Provisions
(a)
Where a Deemed-to-Satisfy Solution is proposed, Performance RequirementJP1 is satisfied by complying with—
(i)
J0.1 to J0.5; and
(ii)
J1.1 to J1.6; and
(…
/editions/2019/ncc-2019-volume-one/section-j-energy-efficiency/part-j0-energy-efficiency
Deemed-to-Satisfy Provisions
J0.0 Deemed-to-Satisfy Provisions
(a)
Where a Deemed-to-Satisfy Solution is proposed, Performance RequirementJP1 is satisfied by complying with—
(i)
J0.1 to J0.5; and
(ii)
J1.1 to J1.6; and
(…
/editions/2019/ncc-2019-volume-three/south-australia/sa-section-f-site-waste-water-systems
SA Part F1 On-site waste water management systems
Introduction to this Part
This Part sets out the requirements for the design, construction, installation, replacement repair, alteration and maintenance of any part of an on-site wastewater…
/news/2022/ncc-2025-commercial-building-energy-efficiency-advice-request-tender
An approach to market process is now open on…If you have any enquiries please contact…
Fire risk summary
/resource/report/fire-risk-summary
Fire Code Reform Centre (Project 4) This Fire-risk: Summary Report, provides a summary of the development and use of the individual models that make up the Fire-risk model (formerly known as CESARE-Risk). This report is primarily applicable for…
Building Confidence Report Outputs
/initiatives/bcr/bcr-outputs
The Building Confidence Report made 24 recommendations to address systemic issues in the Australian building industry. Navigate the below categories to access nationally agreed model guidance and other materials created in response to 22 of those…
Building regulator powers
/resource/guidance-materials/building-regulator-powers
Recommendation 6 - This model guidance, developed for state and territory consideration and implementation, lists the minimum regulatory powers for jurisdictions to draw on to enforce compliance with building laws.
Code of conduct for fire safety engineers
/resource/guidance-materials/code-conduct-fire-safety-engineers
Recommendation 8 - The model Code of conduct for fire safety engineers, developed for state and territory consideration and implementation, sets out minimum obligations for registered practitioners.
/editions/2016/ncc-2016-volume-one/section-j-energy-efficiency/specification-j12-material-properties
1. Scope
This Specification lists the thermal properties of some common construction materials.
Intent
To clarify that covers the relevant properties attributed to common construction materials, air films and airspaces, and reflective…
/editions/2016-a1/ncc-2016-volume-one/section-j-energy-efficiency/specification-j12-material
1. Scope
This Specification lists the thermal properties of some common construction materials.
Intent
To clarify that covers the relevant properties attributed to common construction materials, air films and airspaces, and reflective…
/editions/2019-a1/ncc-2019-volume-one-amendment-1/section-j-energy-efficiency/specification-j12
1. Scope
This Specification lists the thermal properties of some common construction materials.
Intent
To clarify that Specification J1.2 covers the relevant properties attributed to common construction materials, air films and airspaces, and…
/editions/2019/ncc-2019-volume-one/section-j-energy-efficiency/specification-j12-material-properties
1. Scope
This Specification lists the thermal properties of some common construction materials.
Intent
To clarify that Specification J1.2 covers the relevant properties attributed to common construction materials, air films and airspaces, and…
/editions/2016/ncc-2016-volume-two/western-australia/footnote-other-legislation-affecting-buildings
In addition to any applicable provisions of the Building Act 2011, Building Regulations 2012 and this Code, there are a number of other legislative technical requirements affecting the design, construction and/or performance of buildings that…
/editions/2016-a1/ncc-2016-volume-two/western-australia/footnote-other-legislation-affecting
In addition to any applicable provisions of the Building Act 2011, Building Regulations 2012 and this Code, there are a number of other legislative technical requirements affecting the design, construction and/or performance of buildings that…
/resource/report/repeating-thermal-bridges-ceilings-and-floors-modified-calculation-method-stage-2-final-report
Generalised simplified calculation method to calculate thermal bridges in ceilings and suspended floors with an adjacent airspace. (Includes process to deal with battens, encapsulation).
/resource/report/repeating-thermal-bridges-ceilings-and-floors-simuation-and-calculation-stage-1-final-report
CFD analysis to calculate Total R-values and mitigation requirements for thermal bridges in ceilings and suspended floors with adjacent airspace.
/resources/videos/verification-using-reference-building
This video describes the new Verification Method V2.6.2.2 within NCC Volume Two. This method compares a building’s energy usage with a reference building model.