/editions/2019/ncc-2019-volume-one/tasmania/tas-part-h108-pharmacies
Tas H108.1 Application of Part
This Part applies to all pharmacy business premises registered under the Pharmacy Control Act.
Pharmacies must be able to be secured against entry and the interior must be able to be supervised by a pharmacist.…
/news/2021/introducing-your-abcb-industry-board-members
The Australian Building Codes Board is made up of eighteen members including a Chair, the head of each state and territory building administration, a Commonwealth building policy representative, up to seven industry representatives, and a…
/editions/2019-a1/ncc-2019-volume-one-amendment-1/section-f-health-and-amenity/part-f6-condensation
Performance Requirements
FP6.1 Condensation and water vapour management
In a sole-occupancy unit of a Class 2 building or a Class 4 part of a building, risks associated with water vapour and condensation must be managed to minimise their impact on…
/editions/2019-a1/ncc-2019-volume-one-amendment-1/tasmania/tas-part-h117-premises-lead-processing
Tas H117.1 Application of Part
This Part is applicable to every building in which lead processes are used.
Premises for lead processing must—
(a)
provide for the safety and comfort of workers; and
(b)
be constructed in a manner that…
/editions/2019/ncc-2019-volume-one/section-f-health-and-amenity/part-f6-condensation-management
Performance Requirements
FP6.1 Condensation and water vapour management
In a sole-occupancy unit of a Class 2 building or a Class 4 part of a building, risks associated with water vapour and condensation must be managed to minimise their impact on…
/editions/2019/ncc-2019-volume-one/tasmania/tas-part-h117-premises-lead-processing
Tas H117.1 Application of Part
This Part is applicable to every building in which lead processes are used.
Premises for lead processing must—
(a)
provide for the safety and comfort of workers; and
(b)
be constructed in a manner that…
/editions/2019-a1/ncc-2019-volume-one-amendment-1/tasmania/schedule-4-referenced-documents
Tas Schedule 4 Referenced documents
All legislation referenced in this Appendix is Tasmanian State legislation unless noted otherwise.
All referenced documents including legislation, codes, Australian Standards, guidelines and codes of practice are…
/editions/2019/ncc-2019-volume-one/tasmania/schedule-4-referenced-documents
Tas Schedule 4 Referenced documents
All legislation referenced in this Appendix is Tasmanian State legislation unless noted otherwise.
All referenced documents including legislation, codes, Australian Standards, guidelines and codes of practice are…
The Board
/about/board
The Australian Building Codes Board is a standards writing body responsible for the National Construction Code, the WaterMark Certification Scheme and the CodeMark Certification Scheme.
/editions/2016/ncc-2016-volume-two/section-1-general-requirements/part-14-documents-adopted
1.4.1 Schedule of referenced documents
The documents listed in Table 1.4.1 are referred to in the Housing Provisions.
Table 1.4.1: SCHEDULE OF REFERENCED DOCUMENTS
No
Date
Title
BCA Clause(s)
AS/NZS 1170
Structural design actions…
/editions/2016-a1/ncc-2016-volume-two/section-1-general-requirements/part-14-documents-adopted
1.4.1 Schedule of referenced documents
The documents listed in Table 1.4.1 are referred to in the Housing Provisions.
Table 1.4.1: SCHEDULE OF REFERENCED DOCUMENTS
No
Date
Title
BCA Clause(s)
AS/NZS 1170
Structural design actions…
/editions/2016/ncc-2016-volume-one/section-j-energy-efficiency/part-j6-artificial-lighting-and-power
J6.0 Deemed-to-Satisfy Provisions
(a)
Where a Deemed-to-Satisfy Solution is proposed, Performance RequirementsJP1 and JP3 are satisfied by complying with—
(i)
J0.1
to J0.3; and
(ii)
J1.1
to J1.6; and
(iii)
J2.1 to J2.5; and…
/editions/2016-a1/ncc-2016-volume-one/section-j-energy-efficiency/part-j6-artificial-lighting-and
J6.0 Deemed-to-Satisfy Provisions
(a)
Where a Deemed-to-Satisfy Solution is proposed, Performance RequirementsJP1 and JP3 are satisfied by complying with—
(i)
J0.1
to J0.3; and
(ii)
J1.1
to J1.6; and
(iii)
J2.1 to J2.5; and…
Becoming a WaterMark Conformity Assessment Body
/certification/becoming-watermark-conformity-assessment-body
Want to find out how to become a WaterMark Conformity Assessment Body? You can find out how on this page.
/editions/2019-a1/ncc-2019-volume-one-amendment-1/section-j-energy-efficiency/part-j6-artificial
J6.0 Deemed-to-Satisfy Provisions
(a)
Where a Deemed-to-Satisfy Solution is proposed, Performance RequirementJP1 is satisfied by complying with—
(i)
J0.1 to…
/editions/2019/ncc-2019-volume-one/section-j-energy-efficiency/part-j6-artificial-lighting-and-power
J6.0 Deemed-to-Satisfy Provisions
(a)
Where a Deemed-to-Satisfy Solution is proposed, Performance RequirementJP1 is satisfied by complying with—
(i)
J0.1 to J0.5; and
(ii)
J1.1 to J1.6; and
(iii)
J3.1 to J3.7; and…
/editions/2016/ncc-2016-volume-one/tasmania/section-general-provisions
Tas A1.1 Definitions
Insert definition for centre-based care class 4 facilityas follows:
Centre-based care class 4 facility
is a facility as defined in Centre Based Care Class 4 Standards.
Insert definition for centre-based care class 5…
/editions/2016-a1/ncc-2016-volume-one/tasmania/section-general-provisions
Tas A1.1 Definitions
Insert definition for centre-based care class 4 facilityas follows:
Centre-based care class 4 facility
is a facility as defined in Centre Based Care Class 4 Standards.
Insert definition for centre-based care class 5…
/editions/2019-a1/ncc-2019-volume-one-amendment-1/section-j-energy-efficiency/specification-jva
ACT Appendix
1. Scope
This Specification contains requirements that must be complied with in addition to the modelling requirements of JV1, JV2 and JV3.
Intent
To clarify that there are additional requirements to the modelling…
/editions/2019/ncc-2019-volume-one/section-j-energy-efficiency/specification-jva-additional
ACT Appendix
1. Scope
This Specification contains requirements that must be complied with in addition to the modelling requirements of JV1, JV2 and JV3.
Intent
To clarify that there are additional requirements to the modelling…