Displaying 64 - 84 of 99
Provides guidance to develop or approve a scope of proposed remedial work to upgrade an existing building for multi-residential, commercial, industrial and public buildings.
Provides practitioners with sufficient knowledge to successfully apply energy efficiency requirements for residential dwellings.
This supporting documents assists in understanding the focus of changes being considered for the 2022 version of the National Construction Code (NCC 2022) in regards to:
Assists in understanding and applying Part J5.7, Pump System energy efficiency DTS Provisions.
Energy Action was contracted to review the 2016 National Construction Code (NCC2016) and make recommendations on increasing the stringency of the Section J provisions
This case study shows how to calculate the Total R-Value, including thermal bridging, for roof system in a Class 7 storage facility located in climate zone 6.
This case study shows how to calculate the Total R-Value, including thermal bridging, for a wall system in a Class 6 shop located in climate zone 3.
This case study shows how to calculate the Total R-Value, including thermal bridging, for a wall system in a Class 3 residential building located in climate zone 5.
Performance Solution scenario This Performance Solution scenario has been developed to assist building practitioners in formulating a Performance Solution concerning energy efficiency of a Class 5
Report This report outlines the principles and methodology used to develop the proposed residential heating and cooling load limits for all Nationwide House Energy Rating Scheme (NatHERS) climate z
This discussion paper was released in April 2014, it informed and sought feedback from stakeholders on the resilience of new buildings to extreme weather events.
Summary and Instructions The NCC was amended out-of-cycle prior to NCC 2022. NCC 2019 Amendment 1 includes:
Performance Solution scenario This Performance Solution scenario has been developed to assist building practitioners in formulating Performance Solutions using the Green Star - Design and As Built
This report shows the results of a number of building models that compare the energy, cost and greenhouse gas emission reductions of buildings built to Deemed to Satisfy provisions of Section J NCC
Summary of changes The NCC will be amended out-of-cycle prior to NCC 2019. This document details the clauses affected due to NCC 2016, Volume One Amendment 1.
This Case Study outlines developing a DTS Solution for the energy efficiency of a small office building. It is based on the DTS Provisions in Section J of NCC Volume One.
Summary and Instructions The NCC was amended out-of-cycle prior to NCC 2022. NCC 2019 Amendment 1 includes:
Performance Solution scenario This Performance Solution Scenario has been developed to assist building practitioners in formulating Performance Solutions using a NABERS Energy Commitment Agreement.
This document provides an update on a project to review the Energy Efficiency Provisions in the NCC for 2019.
Summary and Instructions The NCC was amended out-of-cycle prior to NCC 2022. NCC 2019 Amendment 1 includes:
Provides guidance to apply the NCC evidence of suitability provisions across all volumes. It includes a framework and decision flow chart to assist in correct use of these provisions.