The Board
/about/board
The Australian Building Codes Board is a standards writing body responsible for the National Construction Code, the WaterMark Certification Scheme and the CodeMark Certification Scheme.
Licence Number:
Licencee:
Specification:
Certifier Name:
Trading Name:
Certifier:
Contact Name:
Licencee Name:
Trading Name:
Certificate:
Model Name:
Brand Name:
Model ID:
/resource/case-study/calculating-total-r-value-case-study-2
This case study shows how to calculate the Total R-Value, including thermal bridging, for a wall system in a Class 6 shop located in climate zone 3. The wall component consists of solid concrete on a steel framed wall.
Licence Number:
Licencee:
Specification:
Certifier Name:
Trading Name:
Certifier:
Contact Name:
Licencee Name:
Trading Name:
Certificate:
Model Name:
Brand Name:
Model ID:
UTNCC-Thermal-bridging-case-study-example-02.pdf
(377.88 KB)
/ncc-navigator/thermal-bridging-commercial-buildings
This NCC Navigator provides an introduction to thermal bridging and how the NCC addresses it for commercial buildings in NCC Volume One. It explains how to account for thermal bridges when calculating the Total R-Value of certain construction types.…
Licence Number:
Licencee:
Specification:
Certifier Name:
Trading Name:
Certifier:
Contact Name:
Licencee Name:
Trading Name:
Certificate:
Model Name:
Brand Name:
Model ID:
/portal/specification/wmts4592004
Licence Number:
Licencee:
Specification:
Certifier Name:
Trading Name:
Certifier:
Contact Name:
Licencee Name:
Trading Name:
Certificate:
Model Name:
Brand Name:
Model ID:
/resource/case-study/calculating-total-r-value-case-study-1
This case study shows how to calculate the Total R-Value, including thermal bridging, for a wall system in a Class 3 residential building located in climate zone 5. The wall component consists of fibre cement cladding on a timber framed wall.
Licence Number:
Licencee:
Specification:
Certifier Name:
Trading Name:
Certifier:
Contact Name:
Licencee Name:
Trading Name:
Certificate:
Model Name:
Brand Name:
Model ID:
UTNCC-Thermal-bridging-case-study-01.pdf
(356.8 KB)
/editions/2016-a1/ncc-2016-volume-one/tasmania/section-h-special-use-buildings-h113-h124
Licence Number:
Licencee:
Specification:
Certifier Name:
Trading Name:
Certifier:
Contact Name:
Licencee Name:
Trading Name:
Certificate:
Model Name:
Brand Name:
Model ID:
Tas Part H113 Foundries
Tas H113.1 Application of Part
This Part is applicable to every building or premises in which foundry operations are undertaken.
Foundries must provide for the comfort and safety of workers on the premises.
Tas H113.2…
/editions/2016/ncc-2016-volume-one/tasmania/section-h-special-use-buildings-h113-h124
Licence Number:
Licencee:
Specification:
Certifier Name:
Trading Name:
Certifier:
Contact Name:
Licencee Name:
Trading Name:
Certificate:
Model Name:
Brand Name:
Model ID:
Tas Part H113 Foundries
Tas H113.1 Application of Part
This Part is applicable to every building or premises in which foundry operations are undertaken.
Foundries must provide for the comfort and safety of workers on the premises.
Tas H113.2…
/portal/certifier/intertek-sai-global-certification-services-pty-ltd/coerco-pty-ltd
Licence Number:
Licencee:
Specification:
Certifier Name:
Trading Name:
Certifier:
Contact Name:
Licencee Name:
COERCO Pty Ltd
Trading Name:
Rapid Plastics (WA) Pty Ltd
Certificate:
Model Name:
Brand Name:
Model ID:
/ncc-navigator/thermal-bridging-residential-buildings
This document explains the requirements for reducing thermal bridging in residential buildings focusing on metal-framed walls, roofs, ceilings and floors. It provides practical guidance on compliance options and methods to improve energy efficiency and…
Licence Number:
Licencee:
Specification:
Certifier Name:
Trading Name:
Certifier:
Contact Name:
Licencee Name:
Trading Name:
Certificate:
Model Name:
Brand Name:
Model ID:
Schedule of Products - Shafts and pumping stations
/schedule-products-shafts-and-pumping-stations
Schedule of Products - Shafts and pumping stations
Licence Number:
Licencee:
Specification:
Certifier Name:
Trading Name:
Certifier:
Contact Name:
Licencee Name:
Trading Name:
Certificate:
Model Name:
Brand Name:
Model ID:
/news/2020/demonstrating-ncc-compliance-using-5113
AS 5113:2016 Classification of external walls of buildings based on reaction to fire performance (AS 5113) is a standard that sets out procedures and criteria for classifying external walls of buildings.
Licence Number:
Licencee:
Specification:
Certifier Name:
Trading Name:
Certifier:
Contact Name:
Licencee Name:
Trading Name:
Certificate:
Model Name:
Brand Name:
Model ID:
/editions/2019/ncc-2019-volume-one/tasmania/section-f-health-and-amenity
Licence Number:
Licencee:
Specification:
Certifier Name:
Trading Name:
Certifier:
Contact Name:
Licencee Name:
Trading Name:
Certificate:
Model Name:
Brand Name:
Model ID:
Part F2 Sanitary facilities
Tas Table F2.3 Sanitary Facilities in Class 3, 5, 6, 7, 8 and 9 Buildings
Delete the Note in Table F2.3 alongside early childhood centres and replace it with the following:
Note: If the centre accommodates…
/editions/2019-a1/ncc-2019-volume-one-amendment-1/tasmania/section-f-health-and-amenity
Licence Number:
Licencee:
Specification:
Certifier Name:
Trading Name:
Certifier:
Contact Name:
Licencee Name:
Trading Name:
Certificate:
Model Name:
Brand Name:
Model ID:
Part F2 Sanitary facilities
Tas Table F2.3 Sanitary Facilities in Class 3, 5, 6, 7, 8 and 9 Buildings
Delete the Note in Table F2.3 alongside early childhood centres and replace it with the following:
Note: If the centre accommodates…
/editions/2016/ncc-2016-volume-one/list-amendments/list-amendments-ncc-2016-volume-one
Licence Number:
Licencee:
Specification:
Certifier Name:
Trading Name:
Certifier:
Contact Name:
Licencee Name:
Trading Name:
Certificate:
Model Name:
Brand Name:
Model ID:
LIST OF AMENDMENTS - NCC 2016 - VOLUME ONE
This set of notes has been prepared by the Australian Building Codes Board to assist NCC users in identifying changes incorporated in the 2016 edition of Volume One.
The notes provide a description of…
/editions/2019/ncc-2019-volume-one/tasmania/tas-part-h108-pharmacies
Licence Number:
Licencee:
Specification:
Certifier Name:
Trading Name:
Certifier:
Contact Name:
Licencee Name:
Trading Name:
Certificate:
Model Name:
Brand Name:
Model ID:
Tas H108.1 Application of Part
This Part applies to all pharmacy business premises registered under the Pharmacy Control Act.
Pharmacies must be able to be secured against entry and the interior must be able to be supervised by a pharmacist.…
/editions/2019-a1/ncc-2019-volume-one-amendment-1/tasmania/tas-part-h108-pharmacies
Licence Number:
Licencee:
Specification:
Certifier Name:
Trading Name:
Certifier:
Contact Name:
Licencee Name:
Trading Name:
Certificate:
Model Name:
Brand Name:
Model ID:
Tas H108.1 Application of Part
This Part applies to all pharmacy business premises registered under the Pharmacy Control Act.
Pharmacies must be able to be secured against entry and the interior must be able to be supervised by a pharmacist.…
/editions/2019/ncc-2019-volume-one/section-j-energy-efficiency/specification-jvb-modelling
Licence Number:
Licencee:
Specification:
Certifier Name:
Trading Name:
Certifier:
Contact Name:
Licencee Name:
Trading Name:
Certificate:
Model Name:
Brand Name:
Model ID:
ACT Appendix
1. Scope
This Specification contains the required modelling parameters for JV2 and JV3.
Intent
To prescribe how the modelling of the proposed and reference building is to be carried out under JV2 and JV3.
This…
/editions/2019-a1/ncc-2019-volume-one-amendment-1/section-j-energy-efficiency/specification-jvb
Licence Number:
Licencee:
Specification:
Certifier Name:
Trading Name:
Certifier:
Contact Name:
Licencee Name:
Trading Name:
Certificate:
Model Name:
Brand Name:
Model ID:
ACT Appendix
1. Scope
This Specification contains the required modelling parameters for JV2 and JV3.
Intent
To prescribe how the modelling of the proposed and reference building is to be carried out under JV2 and JV3.
This…
/editions/2016/ncc-2016-volume-two/part-35-roof-and-wall-cladding/part-352-gutters-and-downpipes
Licence Number:
Licencee:
Specification:
Certifier Name:
Trading Name:
Certifier:
Contact Name:
Licencee Name:
Trading Name:
Certificate:
Model Name:
Brand Name:
Model ID:
Appropriate Performance Requirements
Appropriate :
Where an alternative gutter and downpipe system is proposed as a Performance Solution to that described in Part 3.5.2, that proposal must comply with—
P2.2.1
; and
the relevant Performance…
/editions/2016-a1/ncc-2016-volume-two/part-35-roof-and-wall-cladding/part-352-gutters-and-downpipes
Licence Number:
Licencee:
Specification:
Certifier Name:
Trading Name:
Certifier:
Contact Name:
Licencee Name:
Trading Name:
Certificate:
Model Name:
Brand Name:
Model ID:
Appropriate Performance Requirements
Appropriate :
Where an alternative gutter and downpipe system is proposed as a Performance Solution to that described in Part 3.5.2, that proposal must comply with—
P2.2.1
; and
the relevant Performance…