/editions/2019/ncc-2019-volume-two/part-32-footings-and-slabs/part-325-footing-and-slab-construction
Explanatory information:
Explanatory information:
The footings included in this Part reflect the requirements of AS 2870 and apply to the most common types of soil conditions. If the soil conditions on site are not covered by this Part then…
/editions/2016-a1/ncc-2016-volume-one/victoria/section-f-health-and-amenity
Part F2 Sanitary and other facilities
Substitute application of Performance Requirement FP2.2 as follows:
PERFORMANCE REQUIREMENTS
Application
Application:
FP2.2 only applies to—
a Class 2 building or a Class 4 part of a building; and…
/editions/2016/ncc-2016-volume-one/victoria/section-f-health-and-amenity
Part F2 Sanitary and other facilities
Substitute application of Performance Requirement FP2.2 as follows:
PERFORMANCE REQUIREMENTS
Application
Application:
FP2.2 only applies to—
a Class 2 building or a Class 4 part of a building; and…
/editions/2016-a1/ncc-2016-volume-one/new-south-wales/section-c-fire-resistance
Part C1 Fire Resistance and Stability
Delete C1.10(a)(v), C1.10(b) and C1.10(c)(xiii) and insert NSW C1.10(a)(v), NSW C1.10(b) and NSW C1.10(c)(xiii) as follows:
NSW C1.10 Fire hazard properties
(a)
The fire hazard properties of the following…
/editions/2016/ncc-2016-volume-one/new-south-wales/section-c-fire-resistance
Part C1 Fire Resistance and Stability
Delete C1.10(a)(v), C1.10(b) and C1.10(c)(xiii) and insert NSW C1.10(a)(v), NSW C1.10(b) and NSW C1.10(c)(xiii) as follows:
NSW C1.10 Fire hazard properties
(a)
The fire hazard properties of the following…
/editions/2019-a1/ncc-2019-volume-two-amendment-1/section-3-acceptable-construction/how-use-section
Explanatory information:
Explanatory information:
This is a non-mandatory guide on how to use Section 3 of the Housing Provisions.
Introduction
Section 3, Parts 3.0 to 3.12 are Deemed-to-Satisfy Provisions that are considered to be…
/editions/2019/ncc-2019-volume-two/section-3-acceptable-construction/how-use-section-3
Explanatory information:
Explanatory information:
This is a non-mandatory guide on how to use Section 3 of the Housing Provisions.
Introduction
Section 3, Parts 3.0 to 3.12 are Deemed-to-Satisfy Provisions that are considered to be…
/editions/2019/ncc-2019-volume-one/victoria/section-f-health-and-amenity
Part F2 Sanitary and other facilities
Substitute application of Performance Requirement FP2.2 as follows:
Performance Requirements
Application
Application:
FP2.2 only applies to—
a Class 2 building or a Class 4 part of a building; and…
/editions/2019-a1/ncc-2019-volume-one-amendment-1/section-f-health-and-amenity/part-f2-sanitary-and-dts
Deemed-to-Satisfy Provisions
F2.0 Deemed-to-Satisfy Provisions
Vic F2.0
(a)
Where a Deemed-to-Satisfy Solution is proposed, Performance Requirements FP2.1 to
FP2.6 are satisfied by complying with—
(i)
F2.1 to
F2.9; and
(…
/editions/2019/ncc-2019-volume-one/section-f-health-and-amenity/part-f2-sanitary-and-other-dts
Deemed-to-Satisfy Provisions
F2.0 Deemed-to-Satisfy Provisions
Vic F2.0
(a)
Where a Deemed-to-Satisfy Solution is proposed, Performance Requirements FP2.1 to
FP2.6 are satisfied by complying with—
(i)
F2.1 to
F2.9; and
(…
/editions/2016-a1/ncc-2016-volume-one/section-j-energy-efficiency/specification-j16-floor
1. Scope
This Specification describes the thermal performance of some common forms of floor construction.
Intent
To clarify that outlines the thermal performance of some of the more common forms of floor construction.
2.…
/editions/2016/ncc-2016-volume-one/section-j-energy-efficiency/specification-j16-floor-construction
1. Scope
This Specification describes the thermal performance of some common forms of floor construction.
Intent
To clarify that outlines the thermal performance of some of the more common forms of floor construction.
2.…
/editions/2019-a1/ncc-2019-volume-one-amendment-1/new-south-wales/section-c-fire-resistance
Part C1 Fire resistance and stability
Delete C1.10(a)(v), C1.10(b) and C1.10(c)(xiii) and insert NSW C1.10(a)(v), NSW C1.10(b) and NSW C1.10(c)(xiii) as
follows:
NSW C1.10 Fire hazard properties…
/editions/2019/ncc-2019-volume-one/new-south-wales/section-c-fire-resistance
Part C1 Fire resistance and stability
Delete C1.10(a)(v), C1.10(b) and C1.10(c)(xiii) and insert NSW C1.10(a)(v), NSW C1.10(b) and NSW C1.10(c)(xiii) as follows:
NSW C1.10 Fire hazard properties
(a)
The fire hazard properties of the following…
WaterMark Home
/watermark-home
The WaterMark Certification Scheme is a mandatory scheme for plumbing and drainage products of a certain type. Certification ensures products are fit for purpose and appropriately authorised for use in plumbing and drainage installations.
/resource/advisory-note/fire-performance-external-walls-and-cladding
At its meeting on 19 February 2016, the Building Ministers’ Forum agreed to the development and implementation of a range of measures to help address risks associated with high risk cladding products on high rise buildings. This included a National…
/editions/2016-a1/ncc-2016-volume-one/section-f-health-and-amenity/part-f2-sanitary-and-other
F2.0 Deemed-to-Satisfy Provisions
Vic F2.0
(a)
Where a Deemed-to-Satisfy Solution is proposed, Performance Requirements to are satisfied by complying with—
(i)
F2.1
to F2.8; and
(ii)
for public transport buildings, Part H2; and…
/editions/2016/ncc-2016-volume-one/section-f-health-and-amenity/part-f2-sanitary-and-other
F2.0 Deemed-to-Satisfy Provisions
Vic F2.0
(a)
Where a Deemed-to-Satisfy Solution is proposed, Performance Requirements to are satisfied by complying with—
(i)
F2.1
to F2.8; and
(ii)
for public transport buildings, Part H2; and…
/editions/2019-a1/ncc-2019-volume-two-amendment-1/section-2-performance-provisions/part-22-damp-and
Explanatory information:
Explanatory information:
Objective
O2.2
The Objective is to—
safeguard occupants from illness or injury and protect the building from damage caused by—
surface water; and
external moisture entering a…
/editions/2019/ncc-2019-volume-two/section-2-performance-provisions/part-22-damp-and-weatherproofing
Explanatory information:
Explanatory information:
Objective
O2.2
The Objective is to—
safeguard occupants from illness or injury and protect the building from damage caused by—
surface water; and
external moisture entering a…