/editions/2019-a1/ncc-2019-volume-one-amendment-1/schedule-5-fire-resistance-building-elements
1. Scope
This Schedule sets out the procedures for determining the FRL of building elements.
2. Rating
A building element meets the requirements of this Schedule if—
(a)
it is listed in, and complies with Table 1 of this Schedule; or…
/editions/2019/ncc-2019-volume-one/schedule-5-fire-resistance-building-elements/schedule-5-fire
1. Scope
This Schedule sets out the procedures for determining the FRL of building elements.
2. Rating
A building element meets the requirements of this Schedule if—
(a)
it is listed in, and complies with Table 1 of this Schedule; or…
/editions/2019/ncc-2019-volume-two/schedule-5-fire-resistance-building-elements/schedule-5-fire
1. Scope
This Schedule sets out the procedures for determining the FRL of building elements.
2. Rating
A building element meets the requirements of this Schedule if—
(a)
it is listed in, and complies with Table 1 of this Schedule; or…
/editions/2019/ncc-2019-volume-three/schedule-5-fire-resistance-building-elements/schedule-5-fire
1. Scope
This Schedule sets out the procedures for determining the FRL of building elements.
2. Rating
A building element meets the requirements of this Schedule if—
(a)
it is listed in, and complies with Table 1 of this Schedule; or…
/editions/2019-a1/ncc-2019-volume-one-amendment-1/section-j-energy-efficiency/part-j1-building
J1.0 Deemed-to-Satisfy Provisions
(a)
Where a Deemed-to-Satisfy
Solution is proposed, Performance
RequirementJP1 is
satisfied by complying with—
(i…
/editions/2019/ncc-2019-volume-one/section-j-energy-efficiency/part-j1-building-fabric
J1.0 Deemed-to-Satisfy Provisions
(a)
Where a Deemed-to-Satisfy Solution is proposed, Performance RequirementJP1 is satisfied by complying with—
(i)
J0.1 to J0.5; and
(ii)
J1.1 to J1.6; and
(iii)
J3.1 to J3.7; and…
/editions/2019-a1/ncc-2019-volume-one-amendment-1/tasmania/tas-part-h113-foundries
Tas H113.1 Application of Part
This Part is applicable to every building or premises in which foundry operations are undertaken.
Foundries must provide for the comfort and safety of workers on the premises.
Tas H113.2 General
(a)
Every…
/editions/2019/ncc-2019-volume-one/tasmania/tas-part-h113-foundries
Tas H113.1 Application of Part
This Part is applicable to every building or premises in which foundry operations are undertaken.
Foundries must provide for the comfort and safety of workers on the premises.
Tas H113.2 General
(a)
Every…
/editions/2019-a1/ncc-2019-volume-two-amendment-1/western-australia/western-australia-additions
Application of Western Australia additions
This appendix contains additional provisions for application in Western Australia as follows:
Heated water systems
WA 1.1 * * * * *
This clause has been…
/editions/2019/ncc-2019-volume-two/western-australia/western-australia-additions
Application of Western Australia additions
This appendix contains additional provisions for application in Western Australia as follows:
Heated water systems
WA 1.1 * * * * *
This clause has been deliberately left blank.
Note…
/editions/2019-a1/ncc-2019-volume-two-amendment-1/western-australia/western-australia-variations
Application of Western Australian variations
This Appendix contains variations for application in Western Australia as follows:
WA Schedule 3 Definitions
Insert definition for potable water as follows:
Potable water
means water…
/editions/2019/ncc-2019-volume-two/western-australia/western-australia-variations
Application of Western Australian variations
This Appendix contains variations for application in Western Australia as follows:
WA Schedule 3 Definitions
Insert definition for potable water as follows:
Potable water
means water…
/editions/2019-a1/ncc-2019-volume-one-amendment-1/section-j-energy-efficiency/specification-j15a
1. Scope
This specification describes the methods of calculating the U-Value and solar admittance of a wall-glazing construction.
Intent
This Specification describes the two calculation…
/editions/2019/ncc-2019-volume-one/section-j-energy-efficiency/specification-j15a-calculation-u
1. Scope
This specification describes the methods of calculating the U-Value and solar admittance of a wall-glazing construction.
Intent
This Specification describes the two calculation methods for determining if wall-glazing construction complies…
/news/2020/plumbing-performance-solutions-western-australia
On 1 May 2015, Western Australia (WA) adopted the Plumbing Code of Australia (PCA) as the primary technical compliance standard for plumbing work.
/editions/2019-a1/ncc-2019-volume-one-amendment-1/section-f-health-and-amenity/part-f6-condensation
Performance Requirements
FP6.1 Condensation and water vapour management
In a sole-occupancy unit of a Class 2 building or a Class 4 part of a building, risks associated with water vapour and condensation must be managed to minimise their impact on…
/editions/2019/ncc-2019-volume-one/section-f-health-and-amenity/part-f6-condensation-management
Performance Requirements
FP6.1 Condensation and water vapour management
In a sole-occupancy unit of a Class 2 building or a Class 4 part of a building, risks associated with water vapour and condensation must be managed to minimise their impact on…
/editions/2019-a1/ncc-2019-volume-one-amendment-1/western-australia/schedule-3-definitions
WA Schedule 3 Definitions
Vary Schedule 3 as follows:
Insert definition for WA public building as follows:
WA public building
means a Class 6 licensed premises or 9b building where persons may assemble for—
(a)
civic, theatrical, social…
/editions/2019/ncc-2019-volume-one/western-australia/schedule-3-definitions
WA Schedule 3 Definitions
Vary Schedule 3 as follows:
Insert definition for WA public building as follows:
WA public building
means a Class 6 licensed premises or 9b building where persons may assemble for—
(a)
civic, theatrical, social…
/ncbp/suspect-non-conformance
If you think a product or material may be non-conforming you can contact the relevant authorities by visiting the Jurisdictional contacts page and select your state or territory.