This Case Study outlines developing a DTS Solution for the energy efficiency of an interior lighting refurbishment for an office building. It is based on the DTS Provisions in Section J, Part J6 Artificial lighting in NCC Volume One.
The…
This Standard provides a set of technical provisions that if complied with enable dwellings to better meet the needs of the community, including older people and people with mobility limitations.
Recommendation 18 - This model guidance, developed for state and territory consideration and implementation, sets out principles and proposed legislative measures for regulating minimum mandatory inspections of building work.
Recommendations 9 & 11 - This model guidance, developed for state and territory consideration and implementation, sets out principles and proposed legislative measures to standardise, clarify and improve building surveyor integrity and enforcement…
Recommendation 10 - The model Code of conduct for building surveyors, developed for state and territory consideration and implementation, sets out minimum obligations for registered building surveyors undertaking statutory functions.
There are new quantified Performance Requirements in NCC 2022.
The National Model Code of Conduct for Building Surveyors sets out minimum obligations for registered building surveyors undertaking statutory functions. It covers four areas:
1. Comply with the law and act in the public interest
2.…
This guide provides an introduction to the DTS Provisions for wet areas in houses focusing on preventing health risks and building damage from internal moisture in wet areas.
Here’s the key changes in health and amenity for NCC 2022.
The Model Regulatory Powers were developed in response to recommendation 6 of the Building Confidence Report (BCR). The recommendation called for jurisdictions to have a broad suite of powers to monitor buildings and building work as the basis for…
In March, we delivered a series of webinars for practitioners to learn about key changes and new provisions in NCC 2022 Volume One and Volume Two for energy efficiency, condensation management and livable housing design.