The ABCB’s Building Codes Committee and/or Plumbing Code Committee has agreed that the following documents are suitable for referencing in the 2022 edition of the NCC.
Important Notice and Disclaimer
The documents listed below are available for consideration for use as part of a Performance Solution complying with the relevant Performance Requirements of the NCC. The availability of these documents for this use is provided on the basis that all persons accessing the information undertake responsibility for assessing the relevance and accuracy of information to their particular circumstances. Users must exercise their own skill and care with respect to their use of this information, carefully evaluate the relevance of the information for their purposes, and obtain independent professional or expert advice where appropriate. The Chief Executive Officer of the Australian Building Codes Board Office, as agent for the Commonwealth of Australia and states and territories of Australia, expressly disclaim all liability arising from or connection to the use of, or reliance on, this information other than in accordance with this Important Notice and Disclaimer. In particular, the use of this information does not guarantee acceptance or accreditation of a design, material, building or plumbing and drainage solution by any entity authorised to do so under any law; or absolve the users from complying with any local, state, territory or Australian Government legal requirements.
Referenced document | Year | Title | Amendment | Vol. One | Vol. Two | Vol. Three |
|---|---|---|---|---|---|---|
AS/NZS 1170.2 | 2021 | Structural design actions, Part 2: Wind actions |
| Yes | Yes |
|
AS 1288 | 2021 | Glass in Buildings – Selection and installation |
| Yes | Yes |
|
AS 1397 | 2021
| Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium |
|
| Yes |
|
AS 1562.3 | 2006 | Design and installation of sheet roof and wall cladding, Part 3: Plastic |
| Yes | Yes |
|
AS 1670.1 | 2018 | Fire detection, warning, control and intercom systems – System design, installation and commissioning, Part 1: Fire | Amdt 1 | Yes | Yes |
|
AS 1670.3 | 2018 | Fire detection, warning, control and intercom systems – System design, installation and commissioning, Part 3: Fire alarm monitoring | Amdt 1 | Yes |
|
|
AS 1670.4 | 2018 | Fire detection, warning, control and intercom systems – System design, installation and commissioning, Part 4: Emergency warning and intercom systems | Amdt 1 | Yes |
|
|
AS 1684.2 | 2021 | Residential timber-framed construction, Part 2: Non-cyclonic areas |
| Yes | Yes |
|
AS 1684.3 | 2021 | Residential timber-framed construction, Part 3: Cyclonic areas |
| Yes | Yes |
|
AS/NZS 1720.4 | 2019 | Timber structures, Part 4: Fire resistance of timber elements | Yes | Yes |
| |
AS 1720.5 | 2015 | Timber structures, Part 5: Nailplated timber roof trusses | Amdt 1 | Yes | Yes |
|
AS 2118.1 | 2017 | Automatic fire sprinkler systems, Part 1: General systems | Amdt 2 | Yes |
|
|
AS 2118.4 | 2012 | Automatic fire sprinkler systems, Part 4: Sprinkler protection for accommodation buildings not exceeding four storeys in height |
| Yes |
|
|
AS/NZS 2293.1 | 2018 | Emergency lighting and exit signs for buildings, Part 1: System design, installation and operation | Amdt 1 | Yes |
|
|
AS/NZS 2327 | 2017 | Composite structures - Composite steel-concrete construction in buildings | Amdt 1 | Yes | Yes |
|
AS 2419.1 | 2021 | Fire hydrant installations, Part 1: System design, installation and commissioning |
| Yes |
|
|
AS 2699.1 | 2020 | Built-in components for masonry construction, Part 1: Wall ties |
| Yes |
| |
AS 2699.3 | 2020 | Built-in components for masonry construction, Part 3: Lintels and shelf angles (durability requirements) |
| Yes |
| |
AS/NZS 3500.0 | 2021 | Plumbing and drainage, Part 0: Glossary of terms |
|
|
| Yes |
AS/NZS 3500.1 | 2021 | Plumbing and drainage, Part 1: Water services |
|
|
| Yes |
AS/NZS 3500.2 | 2021 | Plumbing and drainage, Part 2: Sanitary plumbing and drainage | Amdt 1 |
|
| Yes |
AS/NZS 3500.3 | 2021 | Plumbing and drainage, Part 3: Stormwater drainage |
| Yes | Yes |
|
AS/NZS 3500.4 | 2021 | Plumbing and drainage, Part 4: Heated water services |
|
|
| Yes |
AS 3600 | 2018 | Concrete structures | Amdt 2 | Yes | Yes |
|
AS 3740 | 2021 | Waterproofing of domestic wet areas |
| Yes | Yes |
|
AS 3959 | 2018 | Construction of buildings in bushfire-prone areas | Amdts 1 & 2 | Yes | Yes |
|
AS 4055 | 2021 | Wind loads for housing |
| Yes | Yes |
|
AS 4100 | 2020 | Steel structures |
| Yes | Yes |
|
AS 4200.1 | 2017 | Pliable building membranes and underlays, Part 1: Materials | Amdt 1 | Yes | Yes |
|
AS 4200.2 | 2017 | Pliable building membranes and underlays, Part 2: Installation | Amdt 2 | Yes | Yes |
|
AS/NZS 4234 | 2021 | Heated water systems - Calculation of energy consumption |
|
|
| Yes |
AS 4254.1 | 2021 | Ductwork for air-handling systems in buildings, Part 1: Flexible duct |
| Yes | Yes |
|
AS 5216 | 2021 | Design of post-installed and cast-in fastenings in concrete, |
| Yes | Yes |
|
NASH Standard | 2021 | Steel Framed Construction in Bushfire Areas |
|
| Yes |
|