/editions/2019-a1/ncc-2019-volume-two-amendment-1/section-2-performance-provisions/part-21-structure
Explanatory information:
Explanatory information:
Objective
O2.1
The Objective is to—
safeguard people from injury caused by structural failure; and
safeguard people from loss of amenity caused by structural behaviour; and
protect…
/editions/2019/ncc-2019-volume-two/section-2-performance-provisions/part-21-structure
Explanatory information:
Explanatory information:
Objective
O2.1
The Objective is to—
safeguard people from injury caused by structural failure; and
safeguard people from loss of amenity caused by structural behaviour; and
protect…
/editions/2019-a1/ncc-2019-volume-one-amendment-1/section-j-energy-efficiency/specification-j15b
1. Scope
This Specification describes methods of determining the thermal performance of spandrel panels.
Intent
To detail how to calculate the thermal performance of spandrel panels.
2. Spandrel panel R-…
/editions/2019/ncc-2019-volume-one/section-j-energy-efficiency/specification-j15b-spandrel-panel
1. Scope
This Specification describes methods of determining the thermal performance of spandrel panels.
Intent
To detail how to calculate the thermal performance of spandrel panels.
2. Spandrel panel R-Value: Calculation method 1
Spandrel…
/editions/2016/ncc-2016-volume-two/australian-capital-territory/act-714-external-glazing-application
(a)
Subject to (b), in applying Part 3.12.2 to an addition or extension all glazing on the respective storey, including the addition or extension and any existing glazing in the unaltered part of the storey, must be assessed where Part 3.12.2…
/editions/2016-a1/ncc-2016-volume-two/australian-capital-territory/act-714-external-glazing
(a)
Subject to (b), in applying Part 3.12.2 to an addition or extension all glazing on the respective storey, including the addition or extension and any existing glazing in the unaltered part of the storey, must be assessed where Part 3.12.2…
/editions/2016-a1/ncc-2016-volume-two/part-35-roof-and-wall-cladding/part-351-roof-cladding
Appropriate Performance Requirements
Appropriate Performance Requirements
Where an alternative roof cladding is proposed as a Performance Solution to that described in Part 3.5.1, that proposal must comply with—
; and
; and
the…
/editions/2016/ncc-2016-volume-two/part-35-roof-and-wall-cladding/part-351-roof-cladding
Appropriate Performance Requirements
Appropriate Performance Requirements
Where an alternative roof cladding is proposed as a Performance Solution to that described in Part 3.5.1, that proposal must comply with—
; and
; and
the…
/editions/2016/ncc-2016-volume-three/history-pca-adoption/history-adoption
1.0 Adoption of PCA 2011
The 2011 edition of the PCA was adopted by the Commonwealth, States and Territories as set out in Table 1.0.
Table 1.0 History of adoption of PCA 2011
Administration
Adoption Date
Australian Government
1 May 2011…
/editions/2016-a1/ncc-2016-volume-three/history-pca-adoption/history-adoption
1.0 Adoption of PCA 2011
The 2011 edition of the PCA was adopted by the Commonwealth, States and Territories as set out in Table 1.0.
Table 1.0 History of adoption of PCA 2011
Administration
Adoption Date
Australian Government
1 May 2011…
/editions/2019/ncc-2019-volume-three/history-pca-adoption/history-adoption
1.0 Adoption of PCA 2011
The 2011 edition of the PCA was adopted by the Commonwealth, States and Territories as set out in Table 1.0.
Table 1.0 History of adoption of PCA 2011
Administration
Adoption Date
Australian Government
1…
/editions/2019-a1/ncc-2019-volume-two-amendment-1/south-australia/sa-3.8-additions
Health and amenity
SA 2 Water efficiency
Limitation:
Limitation:
SA2 applies to new Class 1
buildings and, extensions to existing Class 1 buildings where the roof catchment area is not…
/editions/2019/ncc-2019-volume-two/south-australia/south-australia-additions
Health and amenity
SA 2 Water efficiency
Limitation:
Limitation:
SA2 applies to new Class 1 buildings and, extensions to existing Class 1 buildings where the roof catchment area is not less than 50 m2 —
located in Council areas, excluding…
/editions/2016/ncc-2016-volume-three/victoria/section-c-sanitary-plumbing-and-drainage-systems
Part C1 Sanitary Plumbing Systems
Delete C1.2(a) and insert Vic C1.2(a) as follows:
Vic C1.2 General requirements
(a)
The design, construction, installation, replacement, repair, alteration and maintenance of a sanitary plumbing system must…
/editions/2016-a1/ncc-2016-volume-three/victoria/section-c-sanitary-plumbing-and-drainage-systems
Part C1 Sanitary Plumbing Systems
Delete C1.2(a) and insert Vic C1.2(a) as follows:
Vic C1.2 General requirements
(a)
The design, construction, installation, replacement, repair, alteration and maintenance of a sanitary plumbing system must…
/editions/2019-a1/ncc-2019-volume-three-amendment-1/history-pca-adoption/history-adoption
1.0 Adoption of PCA 2011
The 2011 edition of the PCA was adopted by the Commonwealth, States and Territories as set out in Table 1.0.
Table 1.0 History of adoption of PCA 2011…
PCD 2025 - Assisting future electrification and EV charging in homes
/pcd/pcd-2025-assisting-future-electrification-and-ev-charging-homes
These low-cost options will make it easier to replace gas appliances with electrical appliances in houses and to support the uptake of EVs.
/editions/2016-a1/ncc-2016-volume-two/section-2-performance-provisions/part-24-health-and-amenity
VERIFICATION METHODS
V2.4.5 Verification of suitable indoor air quality
For a Class 1 building, compliance with P2.4.5(a) and P2.4.5(b)(i) is verified when it is determined that the building under typical conditions in use is provided with…
/editions/2016/ncc-2016-volume-two/section-2-performance-provisions/part-24-health-and-amenity
VERIFICATION METHODS
V2.4.5 Verification of suitable indoor air quality
For a Class 1 building, compliance with P2.4.5(a) and P2.4.5(b)(i) is verified when it is determined that the building under typical conditions in use is provided with…
/editions/2016-a1/ncc-2016-volume-one/section-j-energy-efficiency/specification-j6-lighting-and
1. Scope
This Specification contains the requirements for lighting and power control devices including timers, time switches, motion detectors and daylight control devices.
Intent
To clarify the extent of items covered by this Specification…